QBC series pendulum bed shot blasting machine is a new type shot blasting cleaning equipment, which introduces advanced technology of “Di sand” and combines the experience of research and manufacture of shot blasting machine in our company in the past twenty years. Apply to large batch of small castings, forgings, welding parts blasting cleaning. The covering ratio of the convex concave surface of the workpiece to be cleaned is more than 95%, which can satisfy the technical requirements of blast cleaning of various materials and workpieces. Double throw head type machine once cleaned 1500 kilograms workpiece, three throw head model can clean 2500 kilograms of workpiece at one time; PLC automatic control, can realize continuous production operation. Compared with the traditional steel track shot blasting machine and the inclined roller type shot blasting machine, the utility model has the advantages of large production, smooth running, low failure rate, etc., and belongs to the newest product which is updated.
Technical features of QBC02 multi shot pendulum bed blasting machine:
The device is an upper open multi angle swing bed that swings back and forth about 120 degrees around its longitudinal axis. Its polygonal shape ensures a smooth roll over of the casting. The shot blasting machine is positioned directly above the casting to ensure that the projection of the shot blasting stream can be applied directly to the cast to be cast. When discharging, the multi angle bed is turned down to the opening, and the cleaned casting is unloaded into the vibrating groove, and then automatically turned back to the charging position to receive the charging. This series of blasting cleaning machine has the following unique advantages:
1.The structure of the rocking bed is adopted to overcome the problem that the horizontal roller clamp and the steel track shot blasting machine can push and break the link.
2.Hydraulic automatic loading and vibration conveying unloading can be carried out simultaneously, safe and reliable, high productivity.
3.Unique multi angle bed design, can make the workpiece in the pendulum bed constantly rolling, for a variety of complex structure of mixed casting can be thrown clean.
4.Swing bed is made of rolling Mn13 non-magnetic wear resistant material, and the service life is 5-8 years.
5.The machine can be intermittent operation, suitable for batch cleaning of small and medium-sized pieces, from its unique structure, it can be easily integrated into the continuous production line.
6.Pulse filter cartridge or bag filter, dust emission is lower than the national standard.