• Getting ready for a blast

    1, check the equipment operation is normal. If spray nozzle is damaged, such as lighting, ventilation, compressed air is normal, the device sand leaks, if any of the foregoing, necessary repairs can only be conducted in a timely manner. 2, verify routes and match parts, avoid part wrong. Inventor...
    Read more
  • Shot blasting machines and sandblast machine what is the difference?

    1) difference between blasting and sandblasting: sandblasting are mechanical or purification of compressed air, spray sand flow strongly to metal surfaces, use the abrasive force of impact, knocks the dirt on it, and achieve the purpose cleanup or modification process. Sandblasting is mainly for...
    Read more
  • How to choose a better shot blasting machine?

    Energy costs continue to rise, the country’s focus on energy saving and environmental protection promotes the technological development of shot blasting machine industry. In view of this mixed bag of shot blasting machinery industry situation, how to select a shot blasting machine, to lower...
    Read more
  • Shot-blasting machine parts-oriented use and maintenance

    Hook type shot-blasting machine, its directional set of rectangular Windows are more prone to wear, so often or regularly check the wear condition, to be able to adjust the directional window position, or replace the redirect. Under normal circumstances, if directional window of the 10MM, it can ...
    Read more
  • Through shot blasting machine electrical system specifications

    In the shot blasting machine, due to various reasons will inevitably produce a variety of failures, resulting in shot blasting machine is not working properly, not only affect the productivity, which will also cause equipment failure. Therefore, after blasting machine electrical failure, shot bla...
    Read more
  • Shot blast machine dust-common problems and solutions

    Use the blasting machine must be installed dust collector. In order to remove rust and other dust; Dust cartridge dust collector-oriented General; because of dust collection efficiency, high accuracy, small size and so on. Shot blast machine dust-common problems and solutions: 1. shot blast machi...
    Read more
  • Consequences of throwing shield from failure to replace

    Blast wheel shot blasting machine is the most important part, shot by the motor, top designer plates, side plates, side protection plates, fixed, block sand table, spindle, combination plates, blades, impeller, targeted cover, impeller, bearings, etc. Throwing pills device wear Nursing Board is u...
    Read more
  • Folding track-type shot blasting machine

    Crawler-type shot blasting machine, suitable for all kinds of parts surface cleaning. All kinds of metal surface cleaning of castings, black Rust on the surface of metal parts, stamping Burr and Burr on the surface of the abate, forging and heat treatment surface treatment of workpieces and sprin...
    Read more
  • Overview of folding hook type shot blasting machine

    Advantages: 1. big shot, a high toss velocity international advanced cantilever type centrifugal impeller, can significantly improve the quality of cleaning rate, access to satisfactory cleaning. 2. simulation of projectile and all drawings are completely shot blasting machine using computer-aide...
    Read more
  • Shot blasting machine safe operation

    1. Prohibition of shot blasting machine without protective equipment operation. 2. must be open when you add or recycling iron fan, horizontal, bucket elevator and vertical spiral. 3. periodic open dust-pulse-jet cleaning to remove dust. Extended dust time pulse after 30 minutes of downtime. 4. i...
    Read more
  • Drum blast machines what are the common faults

    Fault: shot blasting machine running deviation Phenomenon: road, rail and roller inner ring raised bite, road-rail damage. Solution: adjust the wheel bearing screws so that the drum running in a normal state. Breakdown II: steel shot blasting machine is not enough Phenomenon: Clean long, ineffect...
    Read more
  • shot blasting machine

    Steel Tube Shot Blasting Machine: It is widely used for metal rod, steel tube, petroleum, chemical, electric power industry. In the process of forming, processing, transporting and storing of the work piece, there will be oxide coating, rust, slag, dust, oil and others on the surface. The Steel P...
    Read more

WhatsApp Online Chat !