Color Plate Molding Machine

The base plate of color coated steel plate is cold rolled base plate, hot-dip galvanized substrate and galvanized base plate. Coating types can be divided into polyester, silicone-modified polyester, vinylidene fluoride and plastic sol. The surface state of color coated steel plate can be divided into coating plate, embossed plate and printing plate, color coated steel plate is widely used in building appliances and transportation and other industries, for the construction industry is mainly used in steel factory buildings, airports, warehouses and refrigeration and other industrial and commercial building roof walls and doors, civil buildings using color plate less. The difference between it and plastic is that the composition of the material is different. Magnet can be sucked.Molding Machine

Molding Machine 1, in the operation of the unit must be familiar with the operation of the Unit manual, familiar with the operation of the unit. And by the personnel unified Command. 2, the host operator must be skilled to hold the host operation sequence, timely adjustment error repair value. 3, the equipment in the adjustment, the center of the plane requirements of the unified, each machine platform of the face requirements, such as high, the longitudinal deviation of the machine is less than 0.15mm. 4, hoisting lottery to strictly according to the hoisting standard operation, to lottery the necessary protection. The lottery must be tightened on the unwinding rack and properly adjusted for the brakes. 5, the host shutdown after the boot, must wait until the inverter display back to 0HZ to start the main drive motor, otherwise it will damage the inverter. 6, in the operation must always pay attention to the sheet metal forming conditions and surface smooth. 7, when the host in the adjustment should be the motor stop, adjust the upper and lower roller clearance should use the standard thickness ruler, prohibit the use of other knives, steel and other instruments for adjustment. 8. Lottery is not allowed to wear gloves when feeding. 9, in operation, encountered abnormal situation must be in time to stop processing. 10, in the handling of forming color steel must wear gloves. In the hoisting molding color steel must be protected to prevent the wire rope buckle damage color plate. 11, discharge machine must be manned.Molding Machine


Post time: May-09-2018

WhatsApp Online Chat !