Mesh belt type shot blasting machine is a new type of special cleaning equipment designed and manufactured according to the requirements of users. It is a kind of functional shot blasting machine equipment that cleans dish-shaped, sheet-shaped and flat parts and is afraid of colliding with castings, machine bodies and structural parts. Such as aluminum car wheel hub, brake disc, etc
Wire mesh belt continuous pass through shot blasting machine is mainly used in automobile, aerospace, railway and engine machinery manufacturing. Qingdao Huaxin’s continuous metal mesh belt shot blasting machine allows parts to pass through in an automatic, continuous and uninterrupted manner and receive shot blasting cleaning in multiple directions. This series is mainly used for surface shot blasting cleaning of thin-wall castings, thin-wall and fragile iron or aluminum alloy castings, ceramics and other small parts, and can also be used for shot blasting strengthening of mechanical parts. Has the characteristics of good continuity, high cleaning efficiency, small deformation, no pit and the like; It can also be used alone or wired.
Another feature of shot blasting machine equipment is the adoption of patented abrasive flow control valve, which can realize accurate, adjustable and repeatable abrasive flow control. Whether steel pellets or steel grit are used, the flow control magnetic valve can ensure accurate pellet flow control, and the electromagnetic controller performs flow rate control. Convenient installation of the control device, with long-range and short-range control capabilities, shorten production time, improve productivity, optimize pill flow.
In addition, the mesh belt passing shot blasting machine has the following advantages:
1. The arrangement mode of the shot blasting chamber body and blast wheel of the shot blasting machine is determined after computer three-dimensional (3D) by solidworks dynamic shot blasting simulation.
2. The cleaning machine adopts 2-4pcs Q034 high-speed axial seat centrifugal blast wheel turbine impeller, which significantly improves the cleaning efficiency, obtains satisfactory cleaning quality and effectively avoids the occurrence of bullet blocking and burning the motor.
3. The thickness of the hot zone of the shot blasting machine protection plate reaches 12mm, and the special shot separation structure maximizes the shot utilization rate to 95%. In China, this technology is unique to our company.
4. The shot blasting chamber body of the shot blasting machine adopts a box structure formed by welding 10mm thick steel plates, and has high strength without vibration. 12mm Mn13 (service life more than 5 years) is used in the interior, and the guard plate is connected by a stop opening, which effectively prolongs the service life of the chamber body and can make full use of the rebound of projectiles to form a secondary cleaning and shot peening tank.
5. Loose leaf spring sealing V-shaped device is adopted in the front and rear sealing attachment chambers of shot blasting machine, which can effectively prevent shot splashing and reduce the abrasion and scraping of components on the seal. The other sealing layers are sealed with high wear-resistant rubber plates.
6. In order to reduce the friction of the bottom hopper during the dropping process of the shot blasting machine, buffer angle steel is contained on the hopper.
7. Shot blasting machine has baffle plates at both ends of mesh belt in order to prevent the workpiece from deviating during feeding.
8. Shot blasting machine can determine the opening number of shot blasting machine according to the size of the workpiece, so as to reduce unnecessary energy waste and unnecessary breakage of equipment.
OUR COMPANY AND CERTIFICATION:
HUAXIN Foundry has over 20 years history In China. It is located in west city industry park, Jiaonan, Qingdao city, China. We have produced sand Casting machines more than 1000 types, so we have rich experience in sand casting production machines.
Our annual output is about 600sets, and 40% have been exported to USA,Japan,Pakistan,Germany, Australia,Vietnam, Indonesia, South Africa,South America and soon on.
The company founded in 1998, is a combined with designing and production, manufacturing, installation, sales and service foe enterprises to work closely together.
Our main products are Green Sand Automatic Static Pressure Molding Lines,Green sand treatment line,Resin Sand Preparation Line For Foundry,Shot blasting machines,Sand blasting machines, Foundry Core shooting machines,jolt squeeze moulding machines and other foundry machinery.And we also have one foundry plant for producing all kinds of Grey Iron and Ductile Iron Castings.
Casting machines has begun to form domestic production base for machinery equipment. Company mainly technical staff, managers and workshop workers have more than ten years of production experiences in the casting industry technology..
Welcome to our factory for business talk !